|
| Finishing Products
All
releases are included below.
If you are looking for something specific, not shown below,
please use
the
Google Search Link 
here,
or the Google search at the bottom of all pages on our site:
If you are
unable to find an item on our site after using the Google
search,
e-mail us and let us know what item you could not locate.
|
Stock Items!
As much as possible and within the limits of demand
and responsible fiscal management we keep these in
stock |
|
Item Description
Not all items can be in stock at all
times.
Due to minimum order requirements and shipping charges we
"bunch" up re-orders to save you money.
(We reserve the right to correct errors and change
prices without prior notice.) |
Pricing
& Order Link
|
| Note:
Not all of the items below may be in stock or available but
the information is provided for reference purposes. |
Please place your order using our SECURE Shopping Cart site:
http://wig-wag-trains-cart.com/home
If you MUST send an e-mail inquiry, copy & paste the entire description TEXT ONLY (NO pictures!) from the
item you are ordering into your e-mail.
It will save time and reduce confusion in determining
what you
are inquiring about.
With the quantity of lines we carry it's not possible to memorize all of them. |
Be
sure you review our terms pages before placing your order:
First: Terms
Page One Finally: Terms Page Three
If you place an order, you have agreed to our terms. |
Please
remember to give your first and last name and the city and
state where you live in all
your e-mails.
Non-USA
customers please include the country. |
| |
| Item Description |
Pricing
& Order link
|
Part #: MI-1 Micro-Set Decal Solvent
Click
picture to see large view
|
"Micro Set is a very versatile decal setting solution that does several things to the Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding off the decal. Micro Set prepares the surface with special wetting agents that cuts the oils in new paint and converts the adhesive on the back of the decal to a stronger and more lasting one. And finally, Micro Set slightly softens the decals film to make it more flexible so that it can conform better to the model's surface. Better adhesion by the decal to the model prevents tiny air bells from occurring and results in an invisible carrier film or the so called 'painted on look'. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-2 Micro-Sol Decal Solvent
Click
picture to see large view
|
"Micro Sol setting solution is for the most difficult irregular surfaces you find on models. It completely softens the Microscale Decal allowing it to drape down onto the surface of the model conforming perfectly and without distortion. You can get the most amazing results in seemingly impossible places, because Micro Sol actually makes the decal part of the paint. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone, it does the work. Do not touch until dry as the decal is very soft at this stage and could be easily damaged. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-3 Micro Coat Flat
Click
picture to see large view
|
"The Micro Coat finishes are more than just a pretty look. This is one tough finish, and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. Even the Micro Coat Flat and Micro Coat Satin continue to look like new after a great deal of handling. One of the main reasons for the Micro Coat finishes is that they are the ideal way to be sure that your Microscale Decals perform up to their potential for realism. Micro Coat Clear gives you a 'wet look' shine that replicates the new synthetic paint used on the real thing. It is also the answer for a glossy base necessary for decaling. All the Micro Coat Finishes use the same water clear acrylic resin, which is tough and flexible and adheres strongly to paint and plastic. It is rated to last at least twenty years under ordinary conditions, for models this should be forever. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-4 Micro Coat Gloss
Click
picture to see large view
|
"The Micro Coat finishes are more than just a pretty look. This is one tough finish, and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. Even the Micro Coat Flat and Micro Coat Satin continue to look like new after a great deal of handling. One of the main reasons for the Micro Coat finishes is that they are the ideal way to be sure that your Microscale Decals perform up to their potential for realism. Micro Coat Clear gives you a 'wet look' shine that replicates the new synthetic paint used on the real thing. It is also the answer for a glossy base necessary for decaling. All the Micro Coat Finishes use the same water clear acrylic resin, which is tough and flexible and adheres strongly to paint and plastic. It is rated to last at least twenty years under ordinary conditions, for models this should be forever. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-5 Micro Coat Satin
Click
picture to see large view
|
"The Micro Coat finishes are more than just a pretty look. This is one tough finish, and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. Even the Micro Coat Flat and Micro Coat Satin continue to look like new after a great deal of handling. One of the main reasons for the Micro Coat finishes is that they are the ideal way to be sure that your Microscale Decals perform up to their potential for realism. Micro Coat Clear gives you a 'wet look' shine that replicates the new synthetic paint used on the real thing. It is also the answer for a glossy base necessary for decaling. All the Micro Coat Finishes use the same water clear acrylic resin, which is tough and flexible and adheres strongly to paint and plastic. It is rated to last at least twenty years under ordinary conditions, for models this should be forever. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-6 Micro Weld
Click
picture to see large view
|
"There is nothing quite like the new Micro Weld styrene solvent cement, and you will find that application, although easier, is very much different from the old. You will also find that it is much more forgiving, stronger when dry, and will not craze clear plastic or tend to warp thin plastic parts like other cements. Since it will not ""lift"" most paints, it can be used to repair models without repainting. No longer do you need to hold the parts together while applying adhesive to the seams. You will now have both hands free to position parts properly". |
|
PLEASE NOTE
|
|
Your Destination
|
Shipping Restrictions (DOT)
|
-International
-Overseas
|
This product CANNOT be shipped overseas
|
|
In The U.S.
|
Must Ship SURFACE MAIL only (No Priority Mail)
|
|
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-7 Micro-Mask Liquid Masking Tape
Click
picture to see large view
|
"Micro Mask is like masking tape in a bottle. Just apply it with a brush, let it dry, and cut it to any shape you want with a sharp-pointed knife. Peel out the part where you want to paint, leaving an outer stencil mask, and paint with the method of your choice. Just don't use a water-based paint over it because Micro Mask is water soluble, so use solvent-based paints. You can paint the finest detail you can cut with a knife. Unlike masking tape that can allow paint to go under it,even the most difficult designs come out sharp and clean with Micro Mask. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-8 Micro Metal Foil Adhesive
Click
picture to see large view
|
"Fact is that nothing looks like real metal except real metal. And Micro Foil Adhesive is a very easy and very inexpensive way to apply real metal in the form of metal foil to your models. The most common foil is ordinary household foil which most people have at home. But with a little checking around you will find that there is also stainless steel foil, copper foil, etc. The softer and thinner foils are the easiest to use, but the surface you want to metal clad is not too tough, you can use anything."
|
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-9 Micro Kristal Klear
Click
picture to see large view
|
"If there was ever a modelers secret, this is it. Micro Krystal Klear can do so many things, you will not believe that any product can make such a big difference in the appearance of your models. First, Micro Krystal Klear is a liquid that can be used to form very real looking small windows up to about 1/4"" in size. It is also an adhesive for mounting clear plastic parts, windows, etc. on your models. it can be used to make lens both clear and colored with the addition of a little food coloring. What really makes a remarkable difference in your models is the simple fact that the clear parts can be joined to the painted parts with a completely clear adhesive. What this means is that you do not have to mask around the clear parts, something that is rarely completely successful anyway. And the sills which are painted can be seen through the clear Micro Krystal Klear for the most realistic looking windows you will see on a model. And what the pros like best, it is fast and easy and it stays clear. It cleans-up with water while wet, and is waterproof when dry. You can tell when it is dry because it turns from milky white to clear. And if that were not enough, if you need a super strong and flexible adhesive for wood, plastic, paper or most combinations of dissimilar materials this is a handy thing to have. It's great ! " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-10 Micro Liquidtape
Click
picture to see large view
|
"Micro Liquidtape is a liquid adhesive that when applied to one side of a part and allowed to dry, can be pressed onto another clean part where it will stick firmly enough for display model. and you can take it apart again and again as long as they stay clean. Even then, another coat will renew it. Say you would like to do a complete interior on a model, but when the model is finished you could not see it. If the top or some likely part is separate, you could use Micro Liquidtape as the final assembly and retain the ability to remove it at any time, revealing your detailed interior. " |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-12 Micro Liquid Decal Film
Click
picture to see large view
|
"Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, don't take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. It's that simple. |
| PLEASE NOTE |
|
Your Destination
|
Shipping Restrictions (DOT)
|
-International
-Overseas
|
This product CANNOT be shipped overseas
|
|
In The U.S.
|
Must Ship SURFACE MAIL only (No Priority Mail)
|
|
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MI-11 Micro Prep
Click
picture to see large view
|
A solution that prepares slippery, smooth surfaces for bonding and painting. MicroBond and MicroPrep together will help make the bond to most slippery engineering plastics and smooth surfaces. MicroPrep a delrin, or similar surface, prior to gluing and painting for best results. |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-50 Micro Bond Advanced Adhesive for Slippery Plastics - Thick 1 oz 26.9 mL
Click
picture to see large view
|
MicroBond and MicroPrep together will help make the bond to most slippery engineering plastics and smooth surfaces. MicroPrep a delrin, or similar surface, prior to gluing and painting for best results. |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-51 Micro Bond Advanced Adhesive for Slippery Plastics - Medium 1 oz 26.9 mL
Click
picture to see large view
|
MicroBond and MicroPrep together will help make the bond to most slippery engineering plastics and smooth surfaces. MicroPrep a delrin, or similar surface, prior to gluing and painting for best results. |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-52 Micro Bond Advanced Adhesive for Slippery Plastics - Thin 1 oz 26.9 mL
Click
picture to see large view
|
MicroBond and MicroPrep together will help make the bond to most slippery engineering plastics and smooth surfaces. MicroPrep a delrin, or similar surface, prior to gluing and painting for best results. |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-SP1 Micro Bond System Pack
Click
picture to see large view
|
MB-SP1 MicroBond System Pack - All three viscosities of MicroBond. System Pack does not include MicroPrep. MicroBond is an advanced adhesive and industrial strength. MicroBond has shear strength and will stand up to assorted expansion/contraction properties of different material. Will bond to rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood, etc. Not intended for foam surfaces. For bonding to delrin, celcon, etc. treat the bonding surface with MicroPrep prior to bonding. Bonds in a seconds, Cures in 5 minutes |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-SP2 Micro Bond System Pack (With MicroPrep)
Click
picture to see large view
|
MicroBond System Pack with MicroPrep - ATTN: Cannot be shipped Airmail or Priority Mail. System pack includes all three viscosities of MicroBond + MicroPrep. MicroBond is an advanced adhesive and industrial strength. MicroBond has shear strength and will stand up to assorted expansion/ contraction properties of different material. Will bond to rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood, etc. Not intended for foam surfaces. For bonding to delrin, celcon, etc. treat the bonding surface with MicroPrep prior to bonding. Bonds in a seconds, Cures in 5 minutes. System pack includes nozzle top for MI-11 and includes MI-11 MicroPrep, a surface treatment applied to a difficult to bond surface (Delrin, Celcon, etc.) prior to bonding and or painting. Use a brush or pump action nozzle to apply. Wait for MicroPrep to completely evaporate prior to bonding with MicroBond or painting with your favorite paint (Enamel paints tend to adhere better over a longer period of time). Use with adequate ventilation. Avoid any contact with eyes, skin, or breathing vapors. Residue is destructive to tissue of the mucous membranes, upper respiratory tract, eyes, and skin. Always wear safety glasses. Use gloves (impervious rubber or plastic) and disscard after each use. Eye or skin contact flush with warm water for atleast 15 minutes and seek medical attention. If ingested seek immediate medical attention. MicroPrep is flamable-keep product away from open flame and children. |
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
Part #: MB-SP3 MicroBond System Pack (w/ MicroPrep)
Click
picture to see large view
|
MB-SP3 MicroBond Winter System Pack. WEB ONLY-ATTN: Cannot be shipped Airmail or Priority Mail. AVAILABLE FOR A LIMITED TIME!!! A perfect gift for the model builder. Everything you need to assemble the majority of kits with plastic/ metal parts and etchings. This system pack provides a complete line of all the Microscale adhesives in one convenient system pack. Contains MI-6(MicroWeld), MI-8(Micro Metal Foil Adhesive), MI-10(Micro LiquidTape), MI-11(MicroPrep) all three viscosities of MicroBond, MB-50, MB-51, MB-52. MicroBond is an advanced adhesive and industrial strength. MicroBond has shear strength and will stand up to assorted expansion/ contraction properties of different material. Will bond to rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood, etc. Not intended for foam surfaces. For bonding to delrin, celcon, etc. treat the bonding surface with MicroPrep prior to bonding. Bonds in a seconds, Cures in 5 minutes. System pack includes nozzle top for MI-11 and includes MI-11 MicroPrep, a surface treatment applied to a difficult to bond surface (Delrin, Celcon, etc.) prior to bonding and or painting. Use a brush or pump action nozzle to apply. Wait for MicroPrep to completely evaporate prior to bonding with MicroBond or painting with your favorite paint (Enamel paints tend to adhere better over a longer period of time). Use with adequate ventilation. Avoid any contact with eyes, skin, or breathing vapors. Residue is destructive to tissue of the mucous membranes, upper respiratory tract, eyes, and skin. Always wear safety glasses. Use gloves (impervious rubber or plastic) and disscard after each use. Eye or skin contact flush with warm water for atleast 15 minutes and seek medical attention. If ingested seek immediate medical attention. MicroPrep is flamable-keep product away from open flame and children. |
| PLEASE NOTE
|
| Your Destination
|
Shipping Restrictions (DOT) |
-International
-Overseas
|
This product CANNOT be shipped overseas
|
|
In The U.S.
|
Must Ship SURFACE MAIL only (No Priority Mail)
|
|
|
Click here for
Pricing, Availability
and to
place a
Secure
Order On-Line |
| Item Description |
Pricing
& Order link
|
Stock Checks:
Inventory is a fluid commodity. It changes by the
hour (sometimes by the minute). To retain our pricing structure
we maintain stock levels designed to turnover 6 times each
year. We cannot guarantee stock status till we have an order
in hand. All product is subject to prior sale. If we confirm
that we have it, and, while we are waiting for the order
it sells, you would be upset that we did not hold it.
We used to hold items but learned a VERY EXPENSIVE lesson.
When we held items for customers’ orders, the order
never materialized 80%+ of the time. We lost out on
the orders placed while the item was on hold. Also
we wasted staff time that could have been used to pull actual
orders.
Since we are well known for finding older stock the fact
that it may not be on our shelves at this minute does not
mean we can’t get it. So, as we spell out on our terms
pages, we don’t do it anymore. You may, however, call in and we will tell you if the items
are available and if possible attempt to locate what we
don’t have while you are on the phone. |
| Last Update by: JR |
| Tuesday, August 27, 2013 1:13 PM |
|
|
|
Wig-Wag, LLC
