DT400 Super Throttle & DB150 Command Station Offers

• User interface makes DCC simple.

• Dual throttle controls.

• Full numeric key pad.

• Simplified 4 digit addressing.

• Easy address browsing and selection.

• User friendly text messages to guide you.

• Click encoders for smooth speed control.

• Multi-line LCD display puts all the information you need right at your fingertips.

• Infra-ready out of the box. Radio equipped version also available.

• Ready for transponding and cab signaling.

Plenty of Capacity for Most Layouts

• Run up to 22 addresses at the same time on your system.

• Run up to 22 throttles at the same time on your system.

Over 9000 Locomotive Addresses

• Address 00 for operation of one or more locos without decoders

• Two Digit Addressing is easy to use. (Address 01-127)

• Four Digit Addressing-use the road number of your engines as their addresses. (Address 0128-9000+).

5 Amps of Power to run more trains.

• Selectable scale voltage for safe operation in ALL scales.

Function Control

• Control 13 functions-F0 through F12.

• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).

Decoder Programming

• Built in programmer that can write all CVs.

• Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.

• Operations mode programming can be used to program decoders on the layout.

Stationary Decoders, Turnout Control & Turnout Position Reporting

• Access to stationary decoder control for turnouts and other devices.

• DT400 reports turnout position based on last command sent.

• Control 999 stationary decoder addresses.

Consisting

• Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.

• Advanced consisting, allows only advanced consist capable mobile decoders.

• Basic consisting, program decoders to run on same address.

UP5 Universal Panel

• Makes LocoNet hook up simple!

• 2 LocoNet jacks for hooking up your LocoNet network.

• 3 throttle jacks for hooking up throttles and other non-RailSync devices.

• Included with non-radio sets. Radio equipped sets include UR91 radio receiver.

Expandability with Digitrax LocoNet

• Use Super Empire Builder as a starting point, then add components.

• Use Super Empire Builder as an expansion set with Digitrax equipment you already have installed.

Super Empire Builder is more than just a starter set!

• Because all Digitrax Sets are value priced, they are great as expansion sets for existing systems.

• So, if you need another booster and throttle, it is a much better deal to buy a set!