DT400 Super Throttle and DCS100 Command Station Offers:

• User interface makes DCC simple.

• Dual throttle controls.

• Full numeric key pad.

• Simplified 4 digit addressing.

• Easy address browsing and selection.

• User friendly text messages to guide you.

• Click encoders for smooth speed control.

• Multi-line LCD display puts all information at your fingertips.

• Infra-ready out of the box. Radio version available.

• Ready for transponding and cab signaling.

Big System Capacity for Big Layouts

• Run up to 120 addresses at the same time on your system.

• Run up to 120 throttles at the same time on your system.

Over 9000 Locomotive Addresses

• Address 00 for operation of one or more locos without decoders

• Two Digit Addressing is easy to use. (Address 01-127)

• Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)

5 Amps of Power to Run More Trains

• Selectable Scale Voltage for Safe Operation in ALL Scales

• 8 Amp Version Also Available

Function Control

• Control 14 functions-F0 through F12.

• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).

Two DCC Outputs are Better than One!

• Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!

• Use one output for a braking section while the other runs the layout.

Decoder Programming

• Built in read/write programmer lets you program and read back CV values.

• Supports Paged programming (Digitrax preferred method). Also supports direct and register mode programming.

Consisting

• Universal consisting, Digitrax preferred method. Allows ALL locos to be consisted prototypically, even analog locos.

• Advanced consisting and Basic consisting, too!

• Nested consisting where consists can be consisted together.

Stationary Decoders, Turnout Control & Turnout Position Reporting

• Access to stationary decoder control for turnouts and other devices.

• DT400 reports turnout position based on last command sent.

• Control 999 stationary decoder addresses.

Routes

• Turnout List/Route capability to simplify complex yard operations.

Customizable System Options

• User adjustable voltage trim.

• Turn audible warnings on or off.

• Set up purging options.

• Multi-format command station mode (Motorola Trinary Format).

• DCS100 is the most flexible command station on the market.

Expandability

• Super Chief is just the beginning for large, complex layouts that emphasize prototypical operations.

• With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.

• To expand Super Empire Builder for all the capabilities of the Super Chief, simply add a DCS100.

• If you want to add another throttle at the same time, then it makes sense to add an entire Super Chief set and take advantage of the value pricing offered on Digitrax sets.