|
Power Supplies
All
releases are included below.
If you are looking for something specific, not shown below,
please use
the
Google Search Link here,
or the Google search at the bottom of all pages on our site:
If you are
unable to find an item on our site after using the Google
search,
e-mail us and let us know what item you could not locate.
|
Stock Items!
As much as possible and within the limits of demand and
responsible fiscal management we keep these in stock |
|
Item Description
Not all items can be in stock at all
times.
Due to minimum order requirements and shipping charges we
"bunch" up re-orders to save you money.
(We reserve the right to correct errors and change
prices without prior notice.) |
|
Note:
Not all of the items below may be in stock or available but
the information is provided for reference purposes. |
Please place your order using our SECURE Shopping Cart site:
http://wig-wag-trains-cart.com/home
If you MUST send an e-mail inquiry, copy & paste the entire description TEXT ONLY (NO pictures!) from the
item you are ordering into your e-mail.
It will save time and reduce confusion in determining
what you
are inquiring about.
With the quantity of lines we carry it's not possible to memorize all of them. |
Be
sure you review our terms pages before placing your order:
First: Terms
Page One Finally: Terms Page Three
If you place an order, you have agreed to our terms. |
Please
remember to give your first and last name and the city and
state where you live in all
your e-mails.
Non-USA
customers please include the country. |
Item Description |
|
Part #: PS14 - Power Supply - The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others |
Click
picture to see large view |
- Universal AC input 95-240V 50/60Hz
- US 2 prong plug, in sideways orientation to fit nicely on a plug strip
- Stabilized output
- Weight is only 2 ounces
- Approximately a 4 foot long cable
- Right angle, 2.1 mm center positive connector
- Red LED "power on" indicator
|
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
|
Part #: DTX-PS2012 - 20 Amp DCC Power Supply |
Click
picture to see large view |
Operate up to 4 Five amp boosters with the PS2012 supply. Scale selectable for use with N, HO or large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products.
|
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
|
Part #: PS315 - Power Supply - Recommended by Digitrax for powering Digitrax Zephyr’s DCS50. Works for DC, too!
Click
picture to see large view |
- Fully Assembled and Ready to Run
- Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 3 Amps, 45VA
- Plugs in to DCS50 via connector.
- Plug your PS315 into an appropriate wall outlet (AC120V 60Hz).
|
|
|
Part #: PS514 70W UNIVERSAL AC POWER SUPPLY - Replaces the PS515 & PS315 |
- High efficiency power supply
- 7 selectable output voltages
- For use with Digitrax Starter Sets and accessories in multiple track scales and utility supply usages.
- 12V, 13.8V, 15V, 16.8V, 19V, 20V, 24V DC output
- Slide switch selectable
- Supplied with US to IEC, 3-pin grounded cord set
Click
picture to see large view |
- Meets MEPS III "green" efficiency standards
- CE for EM compatiblity and IEC 60950 safety requirements
- Full galvanic isolation of output voltage from AC input
- RoHS environmentally sensitive manufacturing
- Compact and lightweight
- Power indicator light
- Over current and overload protected
|
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
|
Part #: DTX-PSYC52 Y CABLE FOR PS2012 |
Click
picture tosee large view
|
This big regulated power supply delivers more power with less heat for more efficient booster operation. Operate up to 4 Five amp boosters with the PS2012 supply. Scale selectable for use with N, HO or large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products. |
Detailed Instructions are Included.
Damaged/Defective products should be returned directly to Digitrax for repair.
|
|
|
|
Digitrax No Worries Warranty
Digitrax is giving customers a one year "No Worries" Warranty against manufacturing defects and accidental customer damage on all Digitrax products.
That's it! A simple, straightforward warranty with no tricky language!
End users deal directly with Digitrax so dealers don't get caught in the middle! When you have a problem, simply go to the warranty and repair section of the www.digitrax.com website where you can fill out a repair form and send your product to Digitrax for either warranty or non-warranty repairs. When the repair is complete, they will send it back to you at no additional charge! |
Item Description |
|
Stock Checks:
Inventory is a fluid commodity. It changes by the
hour (sometimes by the minute). To retain our pricing structure
we maintain stock levels designed to turnover 6 times each
year. We cannot guarantee stock status till we have an order
in hand. All product is subject to prior sale. If we confirm
that we have it, and, while we are waiting for the order
it sells, you would be upset that we did not hold it.
We used to hold items but learned a VERY EXPENSIVE lesson.
When we held items for customers’ orders, the order
never materialized 80%+ of the time. We lost out on
the orders placed while the item was on hold. Also
we wasted staff time that could have been used to pull actual
orders.
Since we are well known for finding older stock the fact
that it may not be on our shelves at this minute does not
mean we can’t get it. So, as we spell out on our terms
pages, we don’t do it anymore. You may, however, call in and we will tell you if the items
are available and if possible attempt to locate what we
don’t have while you are on the phone. |
Last Update by: GJC |
Thursday, July 11, 2019 1:00 PM |
|
|
|