September 20, 2002 -
Sullivan Indiana.
Photo courtesy of
Larry E. Gilbert.

Wig-Wag, LLC
N-Scale for the Discriminating Modeler!

No E-Bay Auctions
at this time
Refer a Friend
Please



The Magna Force MF615 Power Supply Products

New releases are included below.
If you are looking for something specific that is not shown,
please e-mail us.

Stock Items

As much as possible we try to keep these in stock
at the best pricing possible.
If an equivalent shop (equal hours, storefront,
toll-free phone, etc) has them regularly
listed at a lower price, let us know.

Item Description
Not all items can be in stock at all times.
Due to minimum order requirements
and shipping charges we "bunch" up re-orders to save you money.

(We reserve the right to correct errors and change prices without prior notice.)

MSRP
Our
Price
E-mail or
reserve link
Not all of the items below are in stock or still available
but the information is provided for reference purposes.

DCC Specialties has developed and is distributing a new DCC power supply specifically designed for DCC systems. Magna Force MF615 is a high performance model railroading DCC power supply recommended for Digitrax, Lenz, NCE, and other DCC systems.

Please remember to give your first and last name and preferably at least the city and state where you live in all your e-mails.

Non-USA customers please include the country.

Please copy & paste the entire description line (no pictures please) from the item you are ordering into your e-mail.
It will save time and reduce possible confusion in determining what you are ordering.
With the quantity of lines we carry it's not possible to memorize all of them.
Item Description
MSRP
Our
Pricing
E-mail or reserve link

P/N: DCC-MF615 -- Magna Force MF615

The first DCC power supply specifically designed for DCC! Recommended for Digitrax, Lenz, NCE, and other DCC systems. Outperforms all others in price, power, safety, and features.

DCC Specialties has developed and is distributing a new DCC power supply specifically designed for DCC systems. Magna Force MF615 is a high performance model railroading DCC power supply recommended for Digitrax, Lenz, NCE, and other DCC systems.

Features

* Magna Force has a grounded, 16AWG, fail-safe three-wire input and output
* Illuminated rocker power switch
* Circuit breaker protection on the output
* 6 A, 15 VAC Output, Input 120 VAC
* Sealed unit - impact resistant enclosure
* Magna Force was developed and is distributed by DCC Specialties.
* Installation Information

Model No. MF615 • DCC Power Supply: Class 2 SELV Transformer • Input: 120VAC 60Hz • Output: 15VAC, 6 Amp

Magna Force MF615 Transformer Load Performance

Magna Force MF615 Load Performance
$49.95
$37.47

E-Mail your
Order

AOL Hotmail
& Similar Users
Read This

Magna Force MF615 DCC Power Supply Pictures


Magna Force MF615

Magna Force MF615 with Digitrax system

Magna Force MF615 with Lenz system

Magna Force MF615 with NCE Corp system

Magna Force MF615 Installation

CAUTION: Magna Force MF615 is an electronic unit, not a toy! NOT to be used by children under 12 years of age. It contains no serviceable parts - DO NOT DISASSEMBLE.

• Download Installation Instructions in PDF (205 kB)

Installation Instructions

1. Please read the following instructions before proceeding.
2. Do not plug unit into AC wall outlet until initial installation is completed.
3. Tools required: screwdriver, wire strippers.
4. The 3-wire output of the Magna Force connects to your DCC system as follows:
* The center conductor is a ground wire, and can be connected to the chassis of your DCC system or DCC system ground.
* The outer conductors, 15 V AC, are connected to the inputs of your DCC system. See connection diagrams - figure (1) for Digitrax, figure (2) for Lenz, and figure (3) for NCE.
* Green denotes ground wire, actual wire may be another color.

Your Magna Force MF615 is protected from shorting or overload. If you experience a power supply overload, the unit will shut down with no output power. Please turn off the power supply and allow about a minute for the MF615 to reset.

Connection Diagrams

Digitrax
1. Connect the two terminals on the DB150 or DCS100 marked POWER IN to the Magna Force outer wires.
2. Plug in the MF615 and turn on to power up your booster.
3. DCS100 or DB150 will beep once and its “POWER ON” LED will come on.
SEE PICTURE

Lenz
For a quick start, connect terminals U and V of the LZV100 to Magna Force.
SEE PICTURE

NCE
Connect Magna Force to both sets of power terminals on the Powerhouse as shown.
SEE PICTURE

NOTE: POWER wires must be connected to both sets of power terminals. Units produced after 11/1/2003 may not require both power connections.
Item Description
MSRP
Our
Pricing
E-mail or reserve link

 

 

 
   
           
         
Badger
         
   
Cal Freight
   
 
CTT
 
     
Excel
Hobby
Tools
Floquil
   
GHQ
Gold Medal Models
Herpa
  
   
J-n-J
JL Innovative Design
    
   
Kibri
    
 
         
   
Mini-Figs
Model
Rail
Stuff
Monroe Models
  
   
Mountaineer Precision Products
Northeastern Scale Models
  
       
       
       Stewart Products    
   
Tichy
Train
Group
    
Unreal Details
   
Not all of the items on this page may still be in stock or available
but the information is provided for reference purposes.
(We reserve the right to correct errors and change prices without prior notice.)

Google
WWW www.wig-wag-trains.com